Why the order matters in the Fenix
The Fenix A320 behaves like the real aircraft, so doing things out of order has real consequences. Start aligning the IRS late and you'll sit at the gate waiting for it. Forget the APU bleed and the engines won't start. Leave the spoilers unarmed and they won't deploy on landing.
Airline crews work from memorised flows (a set sweep of the panels) and then read a short checklist to confirm the critical items. Flying single-pilot in the sim, it's easier to have every action written down in flow order, so nothing gets missed while you're also talking to ATC.
That's what this checklist is: every action, in the order you'd do it in the seat, grouped into the phases of a real flight.
The full Fenix A320 flow, Pre-Flight to securing the aircraft.
Grouped the way you fly it. Go Around sits straight after Landing, where you'll need it if the approach isn't stable.
Ground
- 01Pre-Flight
- 02Cockpit Preparation
- 03MCDU
- 04Before Start
- 05Pushback & Engine Start
- 06After Start
- 07Taxi
- 08Before Takeoff
Departure
- 09Takeoff
- 10After Takeoff
- 11Above Ten Thousand Feet
En route
- 12Cruise
Arrival
- 13Descent
- 14Below Ten Thousand Feet
- 15Approach
- 16Landing
- 17Go Around
- 18After Landing
- 19Turning to Gate
Shutdown
- 20Parking
- 21Securing the Aircraft
FREE = free in the app with a free account. No card needed.
Pre-Flight
Before you touch a battery switch, make sure every lever and selector is where it should be. If the flap or spoiler lever doesn't match the surfaces when hydraulics come on, things move that you didn't expect.
- PARKING BRAKEON
- WEATHER RADAROFF
- PREDICTIVE WINDSHEAROFF
- SPOILERSDISARMED & RETRACTED
- FLAPSRETRACTED
- ENGINE MODE SELECTORNORM
- ENGINE MASTERSOFF
- THRUST LEVERSIDLE
- TRANSPONDER MODESTBY
- ANTI-SKIDON
- LANDING GEAR LEVERDOWN
- WIPERSOFF
- GPU (EFB)CONNECTED
Cockpit Preparation
This is where the aircraft comes to life: power, the inertial reference system, lights, tests and the EFB. It's the longest phase on the ground, so here it is in full.
- BATTERY 1 & 2ON
- EXTERNAL POWERON
- ADIRS (1, 2 & 3)NAV
- NAV & LOGO LIGHTSON
- SEATBELT SIGNSOFF
- NO SMOKING SIGNSON/AUTO
- EMERGENCY LIGHTSARM
- CREW SUPPLYON
- GROUND CONTROLON
- CVR TESTCHECK
- APU & ENG FIRE TESTSPERFORM
- ANNUNCIATOR LIGHTSTEST
- PROBE/WINDOW HEATAUTO
- ANTI-ICEOFF
- AIR CONDITIONINGAS REQUIRED
- COCKPIT LIGHTSAS REQUIRED
- EFBLOAD FLIGHT PLAN
- FUELING AND BOARDINGSTART
- ATISCONFIRMED
- RADIO PANELSSETUP
- IFR CLEARANCERECEIVED
- BAROSET QNH
- FLIGHT DIRECTORSON
- INITIAL CLIMBSET
- SPEED / HEADINGMANAGED
- EFISCSTR, ARC, 10NM
- ACCU & BRAKE PRESSURECHECKED
- ENGINE OIL QUANTITYCHECKED
- CREW OXYGEN PRESSURECHECKED
- OXYGEN MASK TESTPERFORM
- ECAM STATUSCHECKED
- FUEL PUMPSON
- APU MASTERON
- APUSTART
- APU BLEEDON (WHEN AVAIL)
Things that catch people out in the Fenix
Want the whole startup explained step by step? Read our Fenix A320 cold and dark startup guide, from Pre-Flight to both engines running. New to flows? See flows vs checklist: which comes first.
Ground services live on the EFB
Ground power, fuelling, boarding and the loadsheet are all run from the Fenix EFB (or GSX, if you have it), not the MSFS menus. In Fenix V3 the OFP lives in the Documents app and performance is in the new Takeoff and Landing apps. The checklist tells you when to start each one so boarding finishes before you need the loadsheet.
SimBrief does most of the MCDU for you
With a SimBrief plan, the MCDU's AOC menu and INIT REQUEST fill in your airports, route and flight number. You type the cost index and cruise level, then load the winds with WIND REQUEST. The MCDU phase in the app walks through every key, and the first pages are in our Fenix A320 MCDU tutorial.
Engine 2 first
Many A320 operators start engine 2 first, because it powers the yellow hydraulic system that the parking brake uses. The checklist follows that order.
A320ceo, not neo
The Fenix is an A320ceo with CFM or IAE engines. A neo checklist mostly works, but engine start and some engine indications differ, so use one written for the ceo.
Use it beside the sim
Flight Sim Academy is a web app, so it runs on a second screen, tablet or phone with nothing installed in MSFS. Every item shows in blue until you tick it, just like the ECAM memo. Tap the locate icon next to an item and Explore the Cockpit shows you exactly where that switch is on the Fenix panels.
Members also get printable kneeboard checklists, a full MCDU tutorial and In-Flight Assistance for when an ECAM message appears.
Fenix A320 checklist questions
Is there a free Fenix A320 checklist?
Yes. In Flight Sim Academy, the Pre-Flight and Cockpit Preparation phases are free with a free account, and you tick them off as you go. The other 19 phases, the MCDU tutorial, In-Flight Assistance and the printable kneeboard checklists unlock with a one-time £9.99.
What order should I follow in the Fenix A320?
Pre-Flight, Cockpit Preparation, MCDU, Before Start, Pushback & Engine Start, After Start, Taxi, Before Takeoff, Takeoff, After Takeoff, Above Ten Thousand Feet, Cruise, Descent, Below Ten Thousand Feet, Approach, Landing, Go Around, After Landing, Turning to Gate, Parking and Securing the Aircraft.
Is an A320neo checklist the same as the Fenix?
Not quite. The Fenix is an A320ceo with CFM or IAE engines. Most flows match the neo, but engine start and some engine indications differ, so use a ceo checklist written for the Fenix.
Can I use it with the Asobo A320neo?
You can follow the flows and checks, as they are standard A320 procedure. The EFB steps are written for the Fenix's EFB, so those will look different on other aircraft.
Fly your first full flight in the right order.
Pre-Flight and Cockpit Preparation are free. Unlock all 21 phases for £9.99, once.